another installation is already in progress что делать

«. Another installation is in progress. » or error code 0-1018, 17003-2031, or 2035-0 when installing Office

When you try to install Office you may get an error message that says, We’re sorry, but we could not start your Office installation. Another installation is in progress, please try again later. Or the error message might contain one of these error codes 0-1018, 17003-2031, or 2035-0.

This error usually occurs if another installation, update, or uninstall was running before you tried to install Office.

Check for an Office icon in the Windows system tray and click it to check the install progress. If an install is already running, wait until it’s done before you start your Office install.

If you can’t find an Office icon in the system tray, follow the steps below to restart Office and then try the installation again. If that doesn’t work run the uninstall too to clean up any full or partial Office installations and then reinstall Office.

Restart your computer and reinstall Office

Restart your computer.

To reinstall Office select the version you want to install and follow those steps.

Uninstall and reinstall Office

Use the Office uninstall support tool to completely uninstall Office from your computer and try reinstalling Office again.

Select the button below to download and install the Office uninstall support tool.

Follow the steps below to download the uninstall support tool according to your browser.

Tip: The tool may take a few minutes to download and install. After completing the installation, the Uninstall Office products window will open.

In the lower-lower left corner right-click SetupProd_OffScrub.exe > Open.

Edge (older) or Internet Explorer

At the bottom of the browser window, select Run to launch the SetupProd_OffScrub.exe.

In the pop-up window, select Save Fileand then from the upper-right browser window, select the downloads arrow > SetupProd_OffScrub.exe.

Select the version you want to uninstall, and then select Next.

Follow through the remaining screens and when prompted, restart your computer.

After you restart your computer, the uninstall tool automatically re-opens to complete the final step of the uninstall process. Follow the remaining prompts.

Select the steps for the version of Office you want to install or reinstall. Close the uninstall tool.

Источник

FIX: Another installation is already in progress error

Is there a worst thing than being unable to install a third-party application as, seemingly, something else is currently installing in the background?

That’s the whole deal with the Another installation is already in progress error on Windows 10. Any solutions? More than a few, actually.

In order to get the most out of your PC you need to install third-party applications. Installing applications is usually a simple and straightforward process, but sometimes certain errors can occur.

Users reported Another installation is in progress error when trying to install certain applications, so today we’re going to show you how to fix that error on Windows 10.

How to fix Another installation is already in progress on Windows 10?

1. Restart the Windows Installer service

Windows relies on its services in order to run properly, and there’s a service called Windows Installer that’s in charge of installing new software.

Whenever you try to install a new application, this service will start and help you install it.

Sometimes certain repair or uninstall processes can start automatically in the background, and it can require Windows Installer service in order to run.

If you try to install another software while Windows Installer is running you’ll encounter this error. One of the simplest ways to fix this problem is to open the Services window and to restart the Windows Installer service.

To do that, follow these steps:

2. End Windows Installer process

As we previously mentioned, the Windows Installer service is in charge of installing new applications on your PC.

Windows Installer process is related to this service, and according to some users, you can fix this problem simply by ending the Msiexec process using Task Manager.

This is rather simple, and you can do it by following these steps:

3. Disable Windows Installer service and restart your PC

Windows Installer service is a common culprit for Another installation is already in progress error, and if restarting the service doesn’t help, you might want to temporarily disable it.

This is a simple process and you can perform it by following these steps:

Few users also reported that they fixed the problem simply by changing the Startup Type of Windows Installer service to Automatic. This is a simple procedure, and you can perform it by following the steps above.

4. Perform Disk Cleanup

Few users reported that performing Disk Cleanup fixed the issue for them. It seems that Another installation is already in progress error is caused by temporary files left by previous installations.

By running Disk Cleanup you’ll easily remove any temporary files left by older installations. Running Disk Cleanup is quite simple, and you can perform it by following these steps:

For more advanced clean-up we advise you to check some of the best tools to delete junk files that we selected.

5. Perform a Clean Boot

According to users, sometimes Another installation is already in progress error can appear due to startup applications or services. To fix this problem, you need to perform a Clean Boot, and you can do that by following these steps:

When your PC restarts, check if the problem still persists. If the issue is resolved, it means that a third-party application or service was causing the problem.

To identify the problem, open System Configuration window and turn on disabled services one by one. Keep in mind that you’ll need to restart your PC after enabling a service in order to apply changes.

Be sure to repeat the same process in Task Manager for Startup applications.

6. Check your Registry

Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

Sometimes this problem can be caused by certain values in your registry, so you’ll have to manually edit those values.

Editing your registry can be a dangerous process, so we recommend that you export your registry and use it as a backup in case anything goes wrong. To fix this problem, do the following:

After making changes to your registry, you need to set the Startup type of the Windows Installer service to Disabled. After that, restart your PC and set the Startup type for Windows Installer to Manual.

For detailed instructions on how to do that, check the Solution 3.

7. Uninstall and reinstall Office

Users reported Another installation is already in progress error message while installing Microsoft Office. This can occur because another Office installation or update was running in the background when you started the setup.

To fix this problem, check for the Office icon in the system tray to see if the installation is running. If Office is installing or updating, you’ll need to wait for the process to finish.

If there’s no Office icon in the system tray, you need to uninstall and reinstall Office. To uninstall Office, simply follow these steps:

If the problem persists, consider using a professional-level tool. Unfortunately, some apps are really difficult to uninstall completely.

They leave behind residual files that will interfere with the functionality of your system, in one way or another.

We recommend trying one of the best uninstaller software available because they are equipped with up-to-date technologies that detect and safely remove the smallest traces of any app.

8. Uninstall Java and download offline installer

Users reported this error message while installing Java on their PC. To fix this problem you need to uninstall your current version of Java. To do that, follow these steps:

After Java is uninstalled from your PC, you need to download offline installation of Java. After you download it, start it and follow the instructions on the screen.

9. Re-register Windows Installer

In most cases, this error is caused by Windows Installer, and one potential solution is to re-register Windows Installer. This is relatively simple to do and it requires you to enter two commands in Command Prompt.

To do that, follow these steps:

10. Create a new Windows user

If none of the previous solutions work, your Windows user profile might be corrupted. If that’s the case, you’ll need to create a new user profile and use it instead.

Creating a new Windows user account is rather simple, and you can do it by following these steps:

After creating a new user account, log out of our current account and switch to the new one. Check if the error message appears on a new user account.

If everything is in order, you might want to move your personal files to a new account and start using it as your main account.

11. Fix the “Another installation is in progress” error for Visual Studio 2015

Solution – Edit your registry

Another installation is already in progress error can appear while installing any application, and users reported that it appears while installing Visual Studio 2015.

To fix this problem, you need to delete a single value from your registry. This is relatively simple, but before you make any changes to your registry, we strongly advise that you create a backup.

By doing so, you can remedy any potential issues that can occur after modifying the registry. To fix this problem, follow these steps:

Another installation is already in progress error will prevent you from installing new software. This can be a tedious problem, but we hope that you solved it by using one of our solutions.

Restoro has been downloaded by 0 readers this month.

Источник

Как исправить ошибку Adobe Reader 1500

Основы «Another installation is already in progress»

«Another installation is already in progress» часто называется ошибкой во время выполнения (ошибка). Разработчики программного обеспечения, такие как SoftwareDeveloper, обычно работают через несколько этапов отладки, чтобы предотвратить и исправить ошибки, обнаруженные в конечном продукте до выпуска программного обеспечения для общественности. К сожалению, многие ошибки могут быть пропущены, что приводит к проблемам, таким как те, с ошибкой 1500.

Ошибка 1500, рассматриваемая как «Another installation is already in progress. Complete that installation before proceeding with this installation.», может возникнуть пользователями Adobe Reader в результате нормального использования программы. Таким образом, конечные пользователи предупреждают поставщиков о наличии ошибок 1500 проблем, предоставляя информацию разработчику. Затем Adobe Systems Inc. может исправить эти ошибки в исходном коде и подготовить обновление для загрузки. Чтобы исправить любые документированные ошибки (например, ошибку 1500) в системе, разработчик может использовать комплект обновления Adobe Reader.

В чем причина ошибки 1500?

В большинстве случаев вы увидите «Another installation is already in progress» во время загрузки Adobe Reader. Причины сбоев обработки можно отличить, классифицируя ошибки 1500 следующим образом:.

Большинство ошибок Another installation is already in progress являются результатом отсутствия или повреждения версии файла, установленного Adobe Reader. Как правило, решить проблему позволяет получение новой копии файла Adobe Systems Inc., которая не содержит вирусов. В качестве последней меры мы рекомендуем использовать очиститель реестра для исправления всех недопустимых Another installation is already in progress, расширений файлов Adobe Systems Inc. и других ссылок на пути к файлам, по причине которых может возникать сообщение об ошибке.

Ошибки Another installation is already in progress

Усложнения Adobe Reader с Another installation is already in progress состоят из:

Эти сообщения об ошибках Adobe Systems Inc. могут появляться во время установки программы, в то время как программа, связанная с Another installation is already in progress (например, Adobe Reader) работает, во время запуска или завершения работы Windows, или даже во время установки операционной системы Windows. Важно отметить, когда возникают проблемы Another installation is already in progress, так как это помогает устранять проблемы Adobe Reader (и сообщать в Adobe Systems Inc.).

Эпицентры Another installation is already in progress Головные боли

Проблемы Another installation is already in progress могут быть отнесены к поврежденным или отсутствующим файлам, содержащим ошибки записям реестра, связанным с Another installation is already in progress, или к вирусам / вредоносному ПО.

Особенно ошибки Another installation is already in progress проистекают из:

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Источник

[Solved] “Error 1500. Another installation is in progress” Windows 10

The Error 1500 in Windows 10 is an installation failure error. This error may occur when you try to install a new program or software on your PC. Even though any installation is not going on your PC, this error may show up unexpectedly. Following is the error that shows up: “Error 1500. Another installation is in progress. You must complete that installation before continuing this one“.

The Error 1500 Another installation is in progress usually shows when a program was being installed on your PC earlier. It can happen either if the installation was aborted in between, or even when the installation was completed.

In the following article, we get to know about some genuine methods to help you get rid of this error, so that you are able to install programs on your PC without any hassle.

Here’s how to fix “Error 1500. Another installation is in progress” in Windows 10

There are various methods that will help you will solve the Error 1500 on your computer. To begin with, you can just restart your PC in order to fix the issue. Restarting PC is a standard procedure, and may or may not solve the issue. If it does, then all well and good. But if a restart didn’t fix the issue, or if you cannot afford to restart PC for the time being, try the methods below:

#1 – Close Background Installer Process

It might be possible that an installer process is running in the background, or is stuck in the background. However, you are not able to see it with a quick glance at your PC. This is when the Error 1500 Another installation is in progress would trouble you the most. In order to be able to install a program on your PC without error, you will have to see if any such process is running in the background. And if any such process is found, it needs to be killed.

Here are the steps to follow:

Step 1: Press the Ctrl + Shift + Esc keys on your keyboard to open Windows Task Manager. In the window, go to the Details tab.

Step 2: You will find here a list of Background Processes running.

In the list, look for installer.exe, setup.exe, or msiexec.exe processes.

After the installer background task has ended, try to install the program that you were. This will most probably fix the issue for you.

In case the processes that are mentioned in Step 2 are not found in the Task Manager’s Processes tab, or if the end task method did not work, try the next one to fix Error 1500.

#2 – Disable Windows Installer Service on Startup

Windows Installer is a service that runs on your PC to let you install programs. Sometimes the Windows Installer service starts during an installation process but does not stop after the installation is complete. So, when you try to install another program after that process, Windows shows Error 1500 Another installation is in progress error. In order to tackle this problem, you may have to stop the already running Windows Installer service and set it to stay disabled when Windows boots. This will ensure that the Window Installer service only starts when a program is to be installed.

Here are the steps to follow to Disable Windows Installer Service on Startup:

Step 1: Press Windows + R keys together to open Run dialog box. In the Run box, type services.msc and hit Enter to open the Services manager window.

Step 2: In the Services Manager window, scroll through the list of services until you find the Windows Installer services. Double click on it.

Step 3: A new Windows Installer Properties windows will open up. Here, press the Stop button if you get the option to. Then, from the Startup type drop-down, select the Disabled option. Then click on the Ok button to apply the settings.

Step 4: Now, restart your PC. After restarting, install the program that you were trying to install. You will not get the Error 1500 Another installation is in progress error on your PC. If you are still unable to install the program, try the next method.

#4 – Run SFC to Fix Error 1500 Another installation is in progress

One of the reasons why a program wouldn’t install is because of some broken system files. Broken system files may let your PC think that an installation is already going on, thus you wouldn’t be able to install new programs. In order to fix this, you can run an SFC scan on your PC. An SFC scan will ensure that all the system files on your PC are up to mark and performing their work properly. To run an SFC scan, follow these steps:

Step 1: Search cmd in windows 10 search box. Right click on the cmd icon and click on run as administrator.

Step 2: The Command Prompt window will open up. Here, type the following command and after that press the Enter key:

The SFC scan will begin which may take some time for completion. Wait till the scan is complete, and do not interrupt the SFC scan. When the SFC scan is complete, restart your PC.

When your PC restarts successfully, try installing the program on your PC which you were unable to. In case, you are unable to install and still getting Error 1500, the next step will be to run another scan named DISM scan.

What would have happened is, the SFC scan was not completely able to fix some of the System Files with any kind of error. To make sure that all the System files of Windows are fixed, you should run a DISM scan (Deployment Image & Servicing Management). DISM scan can easily repair corrupt System Files of Windows which SFC would need to run successfully.

For commencing a DISM scan, you will need to open the Command Prompt again in Administrator mode, the same way it is shown in Step 1 above. After that, type the command given below in the Command Prompt window, then hit the Enter key:

Let the DISM scan complete, which may also require some time to complete. Once the DISM scan is complete, run the SFC scan again, as directed in Step 1 and Step 2.

When you are done running the SFC scan again, restart your PC. After the restart, see if you are able to install a new program on your PC or not. In case, you get the Error 1500 Another installation is in progress, the move on to the next step.

#5 – Reset Windows Updates Components Manually

Another good option to fix the Error 1500 Another installation is in progress issue in Windows 10 is resetting Windows Update Component manually using Command Prompt. For this, you will need to run CMD in admin mode and run some commands. Here are the steps that you should follow:

Step 1: Repeat the Step 1 in the Method #4 that is mentioned above. This will run the Command Prompt in Admin mode.

Step 2: Type each line of the commands mentioned below to stop Update Components, one at a time, and press Enter:

Step 3: Now, run each line of these 2 commands one at a time and press Enter button:

Step 4: The update Components that were stopped in Step 2, restart them by running each line of the following commands, one at a time:

After all the commands are run successfully, it would be the time for you to restart your PC. The Error 1500 in Windows 10 would be solved for sure.

#6 – Troubleshoot Windows Update & Windows Store App

This Error 1500 in Windows 10 may also occur when you are trying to install an app in Microsoft Store. If that’s the case, you can try troubleshooting the Windows Update and Windows Store settings. To do so, follow these steps:

Step 1: Open Start menu, and click on the Settings option to open Windows 10 Settings.

Step 2: In the Settings window, you will find various options. Click on the Update & Security option.

Step 3: A new window will open, where you need to look in the left panel for Troubleshoot option. A new set of options will appear in the panel on the right side. On the right side of the panel, look for Windows Store Apps section. Select it, then click on the Run the Troubleshooter option.

The troubleshooter wizard will start running. Follow the on-screen instructions to run the troubleshooter completely.

Step 4: Now, again in the Troubleshooter options, look for Windows Update section on the right side of the window. Select it, then again, click on the Run the Troubleshooter option. Follow the wizard’s instruction to complete the troubleshooting.

Following these steps will fix the issue with Windows Update and Windows App Store update installers. And most probably, you will not get the Error 1500 Another installation is in progress error in Windows 10.

#3 – Disable Active Installation Reference from Registry

Windows’ Registry registers every action that occurs in the operating system and makes Windows work according to the registered registry reference. While installing a program, an installation reference status is added to Windows registry. Once the installation is complete, the reference status is also removed. But in case the installation reference status is not removed due to an error, Windows will not let you install any program and will return Error 1500.

In order to fix this issue, you will have to remove the installation reference status. For this, you can follow the steps given below:

Step 1: Open the Run box by pressing Windows + X keys. In the Run box, type regedit and press the Enter key.

Step 2: Go to the following location in the registry editor.

HKEY_LOCAL_MACHINE \Software\Microsoft\Windows\Installer\InProgress

Step 3: The (Default) string that shows up on the right side of the interface, double-click on it. A box will open up.

Here, delete the value available in the Value data field, then click on the Ok button to apply changes.

Now, close Registry Editor, and just to be on the safe side, restart your PC. After the restart, install the program you were trying to install. If this did not fox the Error 1500 Another installation is in progress issue in Windows 10, give the next method a try.

Finally,

the steps mentioned above will definitely help you out with installing a new program on your PC, without returning any type of error. Let us know in comments, which one worked for you.

Источник